The ToupTek ATR3CMOS20000KMA (known by us as an ATR183M) incorporates the 20 megapixel Sony IMX183 CMOS sensor. This is a monochrome camera which is designed for planetary photography, as well as deep-sky astrophotography.

The sensor in the ATR183M is a 1″ size (13.1 x 8.8mm) sensor with very small 2.4µm pixels. If you have a telescope with a focal length of 1000mm, your field of view will be 44.9 x 30.1 arcminutes, at a resolution of 0.50 arcseconds per pixel.

The ATR183M has a two-stage fan-forced Peltier cooling system which is capable of cooling the sensor up to 45°C below the ambient air temperature. This decreases image noise, especially over long exposures, and will therefore greatly increase the signal to noise ratio. This lower noise gives you a better image overall, because you can retrieve dark details of nebulas and galaxies in the darker areas. The designers of the camera have ensured that that heat transfers quickly away from the sensor.

The camera communicates with the computer using a USB3.0 cable (included with the camera). It has a native driver, but an ASCOM driver is also included. This means that normal image acquisition software (like NINA, Voyager, Sequence Generator Pro, etc.) can be used with the camera. In addition to this, the camera comes with an advanced video and image processing application ToupSky.

Camera details

Sensor detailsDDR3 bufferDew heaterAdditional information

 

 

Specifications of the ToupTek ATR294C

ToupTek part number ATR3CMOS20000KMA
Short name ATR183M
Name Sony IMX183
Size class 1″
Size (mm)  13.1 x 8.8
Full resolution (px) 5440 x 3648
Diagonal (mm) 15.7
Megapixels 20
C/M monochrome
Pixel size (µm) 2.4
DDR3 buffer 512 MB
Download speed (FPS) 18
Quantum efficiency >84%
Full well 15 ke-
Max SNR 41.6 dB
Cooling ability 45°C below ambient
Read noise 2.6 – 1.4 e-
ADC 12 bit

Contents:

  • camera (with M42 male adapter attached)
  • power supply and mains cable
  • USB3 A-B cable
  • rubber sensor cover
  • M42 female adapter for front of camera
  • 16.5mm extender (replaces OAG)
  • 21 mm extender (replaces filter wheel)
  • 48mm to 42mm stepdown ring
  • heavy duty carry case
  • software on USB drive

What's in the box

The user manual for the ATR183M may be downloaded here.

Connection instructions

Reviews

There are no reviews yet.

Be the first to review “ToupTek ATR183M Monochrome DSO and Planetary Camera”

Your email address will not be published. Required fields are marked *

ToupTek ATR183M Monochrome DSO and Planetary Camera

SKU: TT-ATR183M

$1,759.00

Available on back-order

✅ Fast Shipping & Tracking
✅ Stocked in Melbourne, Australia
✅ Expert Advice
✅ Lifetime Technical Support

    Need Expert Advice?

    Visual Astronomy, Astrophotography, Microscopy and Macro Photography can be a little complicated sometimes as there are a lot of options. If you'd like to check something before you purchase just let us know and we'd be happy to help!

    Enquire now or call us (03) 9042 2293

    ToupTek ATR183M Monochrome DSO and Planetary Camera

    SKU: TT-ATR183M

    $1,759.00

    Available on back-order

    The ToupTek ATR3CMOS20000KMA (known by us as an ATR183M) incorporates the 20 megapixel Sony IMX183 CMOS sensor. This is a monochrome camera which is designed for planetary photography, as well as deep-sky astrophotography.

    The sensor in the ATR183M is a 1″ size (13.1 x 8.8mm) sensor with very small 2.4µm pixels. If you have a telescope with a focal length of 1000mm, your field of view will be 44.9 x 30.1 arcminutes, at a resolution of 0.50 arcseconds per pixel.

    The ATR183M has a two-stage fan-forced Peltier cooling system which is capable of cooling the sensor up to 45°C below the ambient air temperature. This decreases image noise, especially over long exposures, and will therefore greatly increase the signal to noise ratio. This lower noise gives you a better image overall, because you can retrieve dark details of nebulas and galaxies in the darker areas. The designers of the camera have ensured that that heat transfers quickly away from the sensor.

    The camera communicates with the computer using a USB3.0 cable (included with the camera). It has a native driver, but an ASCOM driver is also included. This means that normal image acquisition software (like NINA, Voyager, Sequence Generator Pro, etc.) can be used with the camera. In addition to this, the camera comes with an advanced video and image processing application ToupSky.

    Camera details

    Sensor detailsDDR3 bufferDew heaterAdditional information

     

     

    Specifications of the ToupTek ATR294C

    ToupTek part number ATR3CMOS20000KMA
    Short name ATR183M
    Name Sony IMX183
    Size class 1″
    Size (mm)  13.1 x 8.8
    Full resolution (px) 5440 x 3648
    Diagonal (mm) 15.7
    Megapixels 20
    C/M monochrome
    Pixel size (µm) 2.4
    DDR3 buffer 512 MB
    Download speed (FPS) 18
    Quantum efficiency >84%
    Full well 15 ke-
    Max SNR 41.6 dB
    Cooling ability 45°C below ambient
    Read noise 2.6 – 1.4 e-
    ADC 12 bit

    Contents:

    • camera (with M42 male adapter attached)
    • power supply and mains cable
    • USB3 A-B cable
    • rubber sensor cover
    • M42 female adapter for front of camera
    • 16.5mm extender (replaces OAG)
    • 21 mm extender (replaces filter wheel)
    • 48mm to 42mm stepdown ring
    • heavy duty carry case
    • software on USB drive

    What's in the box

    The user manual for the ATR183M may be downloaded here.

    Connection instructions

    Reviews

    There are no reviews yet.

    Be the first to review “ToupTek ATR183M Monochrome DSO and Planetary Camera”

    Your email address will not be published. Required fields are marked *

      Need Expert Advice?

      Visual Astronomy, Astrophotography, Microscopy and Macro Photography can be a little complicated sometimes as there are a lot of options. If you'd like to check something before you purchase just let us know and we'd be happy to help!

      Enquire now or call us (03) 9042 2293