The Wemacro Vertical Stand mounts the Wemacro Focus Rail to work in a vertical position. It can help while focus stacking small specimens such as sand, plant seed, etc. If you need the stand to work in vertical and horizontal positions consider purchasing the Wemacro Vertical and Horizontal Stand. Note that you can always upgrade at a later date by purchasing the Wemacro Vertical to Horizontal Stand Upgrade kit.

The Wemacro Stand features:

• A 4-way slider for accurately adjusting the sample position.
• Six (6) 1/4 inch threaded holes to install a magic arm or flash light.
• The rail can be installed by using screws or the quick clamp.
• Four (4) rubber foot-pads to help reduce vibration from camera.

The base of the stand is 27 cm*17 cm, and minimizes the footprint on your desktop with improved stability. (Smaller than A4 paper!)

If you want to use fine X-Y adjustment platform on this stand,please use 2-way slider as the 4-way slider might be too high for some samples.

The pillar itself is 42cm high. The quick release clamp is the version in the picture blow.

The Wemacro Vertical stand will work with a camera lens as a tube lens (Takumar 200F4 and an infinite objective lens is shown in the image below).

The Wemacro Vertical Stand is also compatible with the 11 inch magic arms. The magic arms are not included in the package.